濟南裝載機液壓系統如何進行檢查？

濟南裝載機http://www.ltjinhai.cn/使用一段時間之后會出現一點問題，濟南裝載機液壓系統需要做好日常的檢查工作，檢查儀器是否能正常使用，如果發現問題也方便及時解決。
There will be no problem after a period of use loaders Jinan, Jinan loader hydraulic system needs to do routine inspections to check whether the instrument can be used normally, if you find it easy to promptly resolve the problem.

濟南裝載機http://www.ltjinhai.cn/液壓系統也是裝載機配件中相當重要的一部分，出現質量物體則會影響裝載機的使用，在一般的現場檢測中，由于流量的檢測比較困難，加之液壓系統的故障往往又都表現為壓力不足，因此在現場檢測中，更多地是采用檢測系統壓力的方法，順利檢測出裝載機會出現的問題，加以解決，確保工作順利進行。解全變速器后發現，方向離合器油道中油封損壞，造成液壓油滲漏，更換油封后故障被排除。
Jinan loader loader hydraulic system is a very important part of fitting in, there will affect the mass of the object using the loader, scene detection in general, more difficult to detect due to traffic, often combined with the failure of the hydraulic system are both expressed as pressure is insufficient, so the scene is detected, the greater is the pressure detection system using the method successfully detected a problem loading the opportunity arises, to be addressed to ensure that the work carried out smoothly. After the solution of the whole transmission found in the direction of the clutch oil channel seal damage, causing hydraulic oil leakage, the fault is removed after replacing the seal.