濟南裝載機配件知識簡介

濟南裝載機配件種類非常復雜，在選購裝載機配件時一定要到專業的裝載機配件生產廠來進行選擇，面對裝載機配件，大家經常會遇到一些比較棘手的問題，現在和大家分享一下。
 1、裝載機配件在工作原理上“下降”慢可能是因?yàn)檫x擇閥卡死了或者發生損壞，或者雙聯泵的效率非常低，還有種原因是雙聯泵上的壓力閥(溢流閥)壓力低或損壞，大家應該找準原因進行處理。
Loader accessories in the works "down" slow probably because the selector valve stuck or damaged, or double pump efficiency is very low, there are a variety of reasons is the pressure valve (relief) on a double-pump pressure low or damaged, you should identify the reasons for processing.
2、裝載機方向盤轉但是不能轉向，造成這種現象的原因有雙向過載緩沖閥損壞或者轉向器內撥銷折斷或變形和轉向油缸活塞脫落。
But you can not turn the steering wheel loaders reason steering, this phenomenon has bidirectional buffer overload valve damage or broken or deformed pin DIP and steering cylinder piston off the steering gear.
3、裝載機轉向沉重需要將轉向管柱與轉向器連接處間隙小或無間隙。
Heavy loader steering column and the need to turn to the small steering gap or no gap junctions.

濟南裝載機配件：http://www.ltjinhai.cn/